-
Garrett T3 Exhaust Discharge Flange (4-Bolt) Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5" downpipe. Contact our Tech Support Line for...$24.84 -
Round Collector Exhaust Gasket Set This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. In the stock application, two will be required, this is a kit and will include (2) gaskets. Alternate exhaust...$8.52 -
Exhaust Manifold Stud and Nut When installing new aftermarket headers, new hardware should be used. An even clamping force is required to keep the header tight against the head in order to seal the exhaust gasket properly. The studs on your truck may...$4.12 -
Engine Swap Header Kit Every day more and more people are swapping newer engines into their old trucks, LC Engineering has developed a totally new header that will work with your newer 2RZ/3RZ in your old style Toyota Pickup or 4Runner. This is a...$525.90 -
Shorty Header Kit(Not Smog Legal) Did you know that a header is a simple yet powerful bolt-on part that can significantly increase the performance of your vehicle? Unlike other complex and expensive modifications, a header improves the flow in your...$525.86 -
Flowtech Shorty Header (Polished) Flowtech Exhaust products are the perfect combination of quality and value. We are proud to offer this 4 into 1 shorty header for your 1975-1981 Toyota Celica or 1975-1988 Toyota Pickup. This header is available in...$338.04 -
2-Bolt Wastegate Flange (You Choose Style) All of LC Engineering's flanges are laser cut then finished machined on the CNC to ensure exact tolerances and fit. These 2-bolt flanges fit most 38mm wastegates such as Tial, Turbosmart, and Turbonetics. They...$13.34 -
2-Bolt Flange (You Choose Size) 2 1/4" Flanges: Steel flange designed for connecting to our header collectors. This is perfect if you are fabricating your own exhaust from the header back. 3/8" thick, for 2-1/4" exhaust tubing. 2 1/2"...$13.34 -
2-Bolt Stub Connector (You Choose Size) 2 1/4" Flange This is a 2-bolt collector reducer to allow you to fabricate your own exhaust after our header. Bolts to our street header and has 2.25" stainless steel tubing to weld or clamp to. 2 1/2" Flange This...$25.70 -
Merge Collector (You Choose Size) You've got that header all constructed, now you just need a collector to tie it all together. LC Engineering has already done the work for you, just pick the one for your application, slip it on, and weld it up! These...$25.70 -
J-Bend 409 Stainless Steel / .065 Wall (Choose Your Size) LC Engineering sells stainless tubing for your project. 409 is the most inexpensive and available stainless steel in the 400 series. It is suitable for normally aspirated header applications and...$30.85 -
Header Flange (You Choose Style) Steel header flange for custom fabrication of exhaust header on 20R, 22R, or 22RE engines. 1/2" thick flange with 1-1/2" or 1 5/8" ports. This header flange is the same one we use when constructing our headers in house...$61.75
-
fast shipping
Speed Delivery