Intake Manifold Plug Kit (Carbureted) This plug kit comes with all the necessary plugs for stock or Offenhauser intake manifolds. The picture shows an Offenhauser manifold with the plug locations. This picture accounts for the most common plug...

Fuel Pump Eccentric (Modified) If you are using our adjustable cam gear and a mechanical fuel pump then you will notice that the fuel pump eccentric interferes with the adjustable cam gear bolts. Well not to worry we have what you need to make this...

Idle Cut-off Solenoid This solenoid threads into the Electric Choke version of the Weber 32/36 carburetor and closes off the flow of fuel in the idle circuit when the ignition is cut. Contact our Tech Support Line for further information at...

Remote Fuel Pressure Regulator Line (-6JIC AN) Have you decided to upgrade to a killer Aeromotive Fuel Pressure Regulator? This line is for connecting your upgraded Aeromotive FPR for your 22re. That regulator is physically a bit bigger than the...

Weber Electric Choke This part is used to replace your old or faulty Electric Choke on a Weber Carb. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not...

Foam Float This float is an improved version from the plastic and older brass style floats. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent...

Weber Stock Air Cleaner (Replacement) This is a replacement air filter assembly for the Weber Downdraft 32/36 or 38 carburetors and contains chrome top and bottom, air filter, clips and hardware for a complete installation. NOTE: This is a...

DCOE Jet Cover (w/ Wing Nut) LC Engineering offers only genuine Weber/Redline products. Don't get fooled by cheap imitations out there, they will never perform as good as genuine Weber equipment. Contact our Tech Support Line for further...

Power Valve This will fit the genuine Weber 32/36 or 38 Carbs we sell. These are not included in the rebuild kits. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...

20R Intake Manifold Plug Kit This plug kit comes with all the necessary plugs for a Cannon Intake Manifold. There are two holes that need this shouldered plug to seal. If you look at the picture you will see that there is a "step" in the hole that the...

Throttle Body Rebuild Kit Have an old worn out throttle body? Well, you are in luck! We have developed this kit that includes a new throttle body gasket, new shaft seals, and LC Engineering's own idle speed screw so you can rebuild yours. Call and...

-6AN Fuel Rail Fitting (Aftermarket Fuel Regulator) Need to connect your Aftermarket Fuel Pressure Regulator to your fuel rail? LC Engineering offers this fitting that goes right into your own fuel rail on your 22RE/22RET. With this fitting there is no...