Oil Filter Remote Kit This remote oil filter relocation kits allow you to locate your oil filter where you want it for more convenient oil changes and increased engine oil capacity. These complete kits include everything you need for easy installation:...

Oil Pick Up Tube 3.4L V6 (5VZ-FE) (Rear Sump Oil Pan) If you're rebuilding your motor and plan on using the factory pan. It's a good idea to replace the pickup for cheap insurance. Over time, the factory oil pickup tube can accumulate debris that you...

Oil Pump Rotor Set Replacement oil pump rotor set for the 3RZ oil pump. If the rotors on your stock oil pump are worn out, this set will cure the problem. NOTE: For 2RZ/3RZ oil pump cover Allen head hardware upgrade kit, see Part #: 1016080...

Oil Drain Line (Stainless Steel Braided) Looking for a better oil drain line for your turbo? Look no further, LC Engineering has everything you need. This particular line was designed for our Turbo kits but it could be used for just about any...

Oil Pump Cover OEM oil pump cover for 3RZ. LC Engineering recommends replacing the cover anytime you have experienced debris going thru the motor or a catastrophic failure. OEM Toyota Part #: 15115-75020 NOTE: For 2RZ/3RZ oil pump cover allen...

Oil Feed Line (Stainless Steel Braided) Looking for a better oil feed line for your turbo? Look no further, LC Engineering has everything you need. This particular line was designed for our Turbo kits but it could be used for just about any application...

Oil Filter Adapter Inlet Plate (w/ O-Ring) On the big and bad race engines, we go with different oiling set up than the factory will use. This may include multiple filters, accumulation tanks, coolers, one-way valves you name it we have done it. This...

Billet Oil Cap (Cog Style) Give your engine a little "zing" under the hood with this all-new Billet Aluminum Oil Cap. Our unique caps are made from quality 6061 T-6 aluminum billets, CNC machined with a brushed finish. NOTE: It will come with a new...

LC Engineering Oil Cap (Billet / Black) Give your engine a little "zing" under the hood with this all-new black anodized Oil Cap. Our unique caps are all made from quality 6061 T-6 aluminum billets, CNC machined with a black anodized finish. NOTE:...

Allen Head Hardware Kit (Oil Pump Cover) On your 2RZ/3RZ engine, replacing the hardware is recommended every time you remove your oil pump cover, Phillip's screws get worn out, and the heads are easily stripped if you don't use an impact screwdriver...

Oil Filter Housing Seal Kit (OEM) When removing the oil filter housing, it is always a good idea to replace these two O-ring seals. Any leak in this area can contaminate the system and affect oil pressure, not to mention the mess in the engine...

O-Ring (Oil Pump) The oil pump O-ring seals and mates the surfaces to keep oil in its respective place. Over time O-rings become brittle and break. Replace a leaky or corroded O-rings before severe damage occurs. OEM Toyota Part #:...