Performance and replacement parts for the 1st gen Toyota Tacoma — 2RZ-FE 2.4L, 3RZ-FE 2.7L, and 5VZ-FE 3.4L V6. Long blocks (including the LCE 5VZ replacement long block launched in 2025), turbo and supercharger kits, headers, suspension, and OEM-spec components.
Polyurethane Steering Rack Bushings
Tighten sloppy steering on your rack and pinion steering system with this urethane bushing upgrade kit! Simple daily driving wears the factory rubber bushings...
Water Temp Sender Manifold
(Inline Radiator Hose)
If you want to add a real water temperature gauge to your Toyota, instead of the factory "idiot light", we have the solution. LC Engineering's...
Street Header Gasket Set
This is a complete gasket set for the proper installation of our street headers.
Kit Includes:
Hardware
O2 sensor gaskets
OEM 2-1/4" collector donut gasket
Header to...
Street Header Gasket Set
This is a complete gasket set for the proper installation of our street headers.
Kit Includes:
Hardware
O2 sensor gaskets
OEM 2-1/2" collector donut gasket
Header to...
Stainless Steel U-Bend
(2 1/2")
LC Engineering sells 409 stainless tubing .065" wall for your project. 409 stainless is a great low-cost choice for exhaust systems. This is the same grade of...
PLX 4.9 Upgrade Wideband Cable
The O2 sensor harness connects the PLX Wideband Controller with a Bosch LSU 4.9 sensor. It includes a 6 position molex mini fit jr male plug on one end and a standard...
Haynes Repair Manual
This repair & service manual for Toyota's is the best available. Intended for the do-it-yourself mechanic, it features step-by-step disassembly and reassembly procedures so...
Header Stud Set
The factory exhaust manifold studs have a shoulder in the center that can interfere with proper header tightening. Our 10mm x 1.25 x 48mm long, heat-treated plated header mounting...
LC Engineering Classic Flexfit Hat | Modern Flag
Show your off-road pride whether you're at the track, on the trail, or in the garage. The LC Engineering Classic Flexfit Hat features our Modern Flag...
OEM Battery Hold Down
(95-04 4Runner / Tacoma)
OEM Toyota battery hold down bracket.
OEM Toyota Part #: 74404-35140
Contact our Tech Support Line for further information at 928-575-2174...
Brass Freeze Plug
At the beginning of any complete engine build-up, the block needs to be cleaned. To do that, all of the block's plugs must be removed (even with a new engine) to allow cleaning...
Torx Multi Tool
LC Engineering brings to you the New 9-Piece Torx - Multi Tool Kit. This all in one set offers all you would need with a tool kit. Don't be stuck again driving around with bulky...
The first-generation Toyota Tacoma (1995–2004) is LCE's deepest Tacoma catalog. It is the platform that built our reputation in the Tacoma community, and it carries the three engines we have spent the most time building parts for: the 2RZ-FE 2.4-liter four-cylinder (1995–2000), the 3RZ-FE 2.7-liter four-cylinder (1995–2004), and the 5VZ-FE 3.4-liter V6 (1995–2004). All three engines have active buyer communities; the 5VZ-FE has been particularly significant since LCE launched the 5VZ replacement long block in August 2025.
Our 1st gen Tacoma catalog covers complete long blocks and crate engines, the LCE Stroker family, supercharger and turbo kits, header kits, master rebuild kits, suspension components (lift kits, lowering kits, leveling, shocks), off-road body (bumpers, sliders, skid plates), and the OEM-spec replacement parts that keep these trucks running well past 250,000 miles. The 1st gen Tacoma is the truck most associated with the Toyota truck reliability reputation in the post-Hilux era — and the parts we build are the same ones our team has been refining for the platform since its launch.
Browse 1st gen Tacoma parts above by system, or use these starting points: