Walbro Universal In-Tank Fuel Pump

TI Automotive Walbro In-Tank Fuel Pump |255LPH High-Pressure | Universal

As an industry leader in automotive fuel systems, TI Automotive (Walbro) is trusted by racing teams and performance enthusiasts worldwide for rock-solid reliability and superior hot-fuel handling. If your modified engine is starving for fuel or you are prepping for a forced induction build, this genuine 255LPH high-pressure in-tank pump delivers the consistent volumetric flow your injectors demand.

Capable of flowing anywhere from 0-115 psi (as determined by your fuel pressure regulator), this high-output pump supports up to 550+ crankshaft horsepower when supplied with a standard 13,5V charging system. Because the factory Toyota fuel pressure regulator is calibrated for 42 psi, upgrading to an adjustable aftermarket fuel pressure regulator (FPR) is highly recommended to manage the increased volume and prevent over-running the stock return system.

What's Included

• (1) Genuine Walbro 255LPH High-Pressure Fuel Pump
• (1) Universal Installation Kit & Wire Harness
• (1) Premium Inlet Filter Sock (Meets or exceeds OE filtration specifications for maximum debris rejection)
• (1) Step-by-Step Installation Guide

Key Features & Specifications

• Flow Rate: 255 Liters Per Hour (LPH)
• Design: Universal In-Tank (Electric)
• Horsepower Capacity: Supports over 550 HP at the crank
• Operating Pressure: 0-115 psi capability (Regulator dependent)
• Performance Gain: Prevents fuel starvation and lean conditions under heavy load or boost.

Fitment & Technical Installation Notes

This is a universal aftermarket performance fuel pump. While it is highly adaptable to most Toyota truck fuel hangers, minor physical modifications (such as minor wiring splices or bracket trimming) may be required depending on your specific year and model.

• Fuel-Install Requirements: The two most common causes of premature fuel pump failure are internal debris contamination and thermal overheating. Always thoroughly flush and clean your fuel tank prior to installing the new pump.
• Warranty Coverage Note: Damage resulting from fuel starvation (running the tank dry), overheating, or debris ingestion due to a dirty tank is not covered under warranty. Always ensure the included inlet filter sock is properly installed.