Redline Weber

Weber Fuel Pressure Regulator (1.5-12lbs)

SKU: 1035043
0
(12 reviews) Write a Review
$119.06
Adding to cart… The item has been added

Weber Fuel Pressure Regulator

(1.5-12lbs)

The regulator's job is to keep the pressure in the fuel system at a constant psi. Your Toyota fuel pressure regulator controls the amount and speed at which fuel is used by your vehicle. A faulty fuel pressure regulator can cause poor fuel mileage, rough running engine or starting problems. This is a simple way to keep your fuel system running right. Weber carbs work best in the 2.5-3psi range.

NOTE: The factory fuel line from the mechanical pump is roughly 1/16" smaller than Weber Regulator/Carb fuel line. Slight pressure is all that is needed to fit the smaller line. If you're running the Weber electric fuel pump, see Part #: 1035046. If your application is a boosted blow thru carburetor setup, see Part #: 1035059.



Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.

  • 1981-1995 22R 2.4L Engines

To open a printable PDF version of this instruction CLICK HERE


Specification Notes:

  • This high quality adjustable fuel pressure regulator is adjustable from 1.5 - 20 psi.
  • This regulator should be mounted on the firewall or the inner fender.
  • Fuel hose size is 8mm or 5/16".
  • In and out are marked on the housing.
  • If you are using a liquid-filled gauge, gauge reading must be done when cold.

Installation:


1. Remove cap using a 12mm wrench



2. Loosen the locking nut at the bottom of the adjuster screw.



3. Using a flat screwdriver and a fuel pressure gauge, adjust the fuel pressure to the desire pressure. Turning screw clockwise will increase pressure, counter clockwise will decrease pressure. Adjust in half turn increments. Weber Carburetor recommended fuel pressure is between 2.5 psi. and 3 psi.



4. Lightly tighten the locking nut making sure the adjustment screw does not move.



5. Tighten the cap while holding the locking nut (the one on the bottom) with another 12mm wrench, so adjustment screw won't move.


12 Reviews Hide Reviews Show Reviews

  • 0
    5
    .

    Posted by Matthew Bertraand on Jul 16th 2021

    Awesome, Very easy to adjust and lock.

  • 0
    5
    Weber FPR (1.5-12lbs)

    Posted by Rex Koga on Apr 3rd 2020

    Ordered my Weber fuel pressure regulator with ease and it got delivered before the estimated date, installed it and adjusted my truck runs way smoother

  • 0
    5
    Weber Regulator

    Posted by Unknown on May 10th 2019

    Thanks to Tony for all the techical advise and helping me fix my problem. Outstanding service!!

Videos Hide Videos Show Videos