-
Heavy Duty Shifter Seat (RED) It's common for the factory shift lever ball seat to wear, crumble and disintegrate over time. This often results in a sloppy or loose transmission shifter. The factory seat is soft so it can be squeezed into position...$14.40 -
Rear Outer Axle Seal (Rubber) Replacing your rear axle seals will cure annoying gear oil leaks from your rear housing, and keeps oil off your rear brakes. You should replace the rear seal any time you remove the axle. Contact our Tech Support...$14.05 -
Rear Inner Axle Seal Replacing your rear axle seals will cure annoying gear oil leaks from your rear housing, and keeps oil off your rear brakes. You should replace the rear seal any time you remove the axle. Contact our Tech Support Line for...$12.43 -
OE Wheel Bearing Grease Seal (Front Hub) Fits in the back side of the front IFS hubs, will be needed anytime you repack or replace front wheel bearings. You will need two seals in order to do your truck. NOTE: Not for Solid Axle applications. For...$11.89 -
Pressure Plate Bolt Pressure plate bolts play an important role in the performance and safety of race cars and street machines alike. That's why LC Engineering recommends replacing yours whenever you change your pressure plate. OEM Toyota Part #:...$10.98 -
Wheel Stud (Front) Class 10.9 rated (M12 X 1.50 threads) replacement studs for front axle application. NOTE: Sold Individually. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for...$10.95 -
Flange Dust Shield Dust shield for use with our triple drilled flange, see Part #: 2053174. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further information at 928-575-2174...$9.99 -
Magnetic Drain Plug (w/ Steel Washer) Magnetic Drain Plugs are a great way of keeping metal from building up in the oil. Low profile design uses recessed 10mm Allen socket. Your choice of Aluminum or steel washers. Steel washer is designed for axle...$9.99 -
Magnetic Drain Plug (w/ Aluminum Washer) Magnetic Drain Plugs are a great way of keeping metal from building up in the oil. Low profile design uses recessed 10mm Allen socket. Your choice of Aluminum or steel washers. Aluminum washers are designed for...$9.99 -
Transfer Case Dust Flange Dust shield for use with triple drilled output flange. Keeps rocks and other trail debris from damaging seals behind the output flange on your transfer case. This product should not be used in a manner that violates Federal...$9.99 -
Inner Axle Seal When you swap out a Birfield joint it's a good idea to change the inner axle seal at the same time to keep the knuckles clean of weeping oil. This is a great part to keep in your tool box for trail side repairs. This product should...$9.99 -
Hub Stud Kit Don’t need an entire hub stud kit? Well here you go, in the single version. Kit Contains: (1) Stud (1) Cone washer (1) Lock washer (1) Nut (8mm) Contact our Tech Support Line for further information at 928-575-2174...$9.99
-
fast shipping
Speed Delivery