• "Boost Tee" Boost Controller (You Choose Color) By far the easiest and most cost-effective way of controlling the amount of pressure going to the wastegate is via a Gated Boost Control Valve. All Turbosmart Gated Boost Controllers are manufactured...
    $97.28
    choose option
  • Turbo Insulating Kit This insulating kit is designed to fit most turbos. Reduces turbo lag and keeps under hood temperatures cooler. Comes complete with easy-to-follow instructions and all of the materials necessary to complete the job of insulating...
    $82.35
  • Turbo Heat Shield (Garrett T3-T4-GT30R) This stainless steel turbo housing heat shield comes with a raw finish. This drastically reduces radiant heat to protect other sensitive engine components with an easy 2 bolt installation. Contact our Tech...
    $82.35
    choose option
  • Fuel Pressure Safety Switch Use this (5 Psi) fuel pressure safety switch (normally open) to control your car's fuel pressure and avoid the risk of shooting nitrous with too little pressure to supply the extra fuel required. You don't want to be...
    $82.29
  • Distributor Drive Gear This drive gear is what allows your distributor to mate with your camshaft. This drive bolts to the front of the cam gear. Must use either a mechanical fuel pump eccentric or our distributor drive spacer, see Part #: 1081025 if...
    $80.97
  • Oil Filter Sandwich Adapter A sandwich adapter permits the installation of an engine oil cooler without relocating the oil filter. It is installed between the oil filter and the filter land on the engine block, providing a pressurized source of oil for...
    $76.40
  • Crankshaft Scraper (Full Perimeter) During regular engine operation, a significant amount of oil adheres to or becomes entrained in, a cloud surrounding the spinning bottom end. This oil eats up the horsepower your engine is making by increasing the...
    $76.34
  • Water Pump Time to replace your leaking water pump? LC Engineering can get you a brand new pump. No remanufactured pump that you have to send a core in for. We also supply a gasket with the pump, so when it's time for a new pump look no further than LC...
    $67.16

Engine Rebuild and Long Block Options for the 1990 – 1995 4Runner

When a 22R or 22RE engine reaches the end of its service life, a full rebuild or a complete long block swap is the most reliable path forward. LCE Performance carries rebuild kits that include all the internal components needed to bring a tired engine back to spec. Our long block and rebuild options include:

  • Rebuild kits with all internal components needed to bring a tired engine back to factory spec
  • Street long blocks for a ready-to-install performance replacement
  • Stage 3 and Stage 5 race-grade long blocks for high-output builds
  • Stroker configurations that add displacement and torque to the 22R and 22RE without an engine swap

Each option is a direct fit for the second generation 4Runner, so you can choose the build level that matches your goals without worrying about compatibility.

Shop 2nd Gen 4Runner Drivetrain Parts

Top End and Bottom End Parts for Your Toyota 4Runner 2nd Gen Engine

The second generation 4Runner responds well to targeted upgrades at both ends of the engine. Our top end and bottom end parts work well together as a staged build plan or as individual replacements when specific components wear out:

  • Top end parts including cylinder heads, valve train components, and camshaft upgrades
  • Bottom end parts including crankshafts, rods, pistons, and engine bearings

Pairing top end and bottom end parts together from the same build stage ensures compatibility and consistent power gains across the entire engine.

View 2nd Gen 4Runner Exhaust Parts

Forced Induction for the Toyota 4Runner 2nd Gen Engine

The 22RE engine responds especially well to forced induction, and LCE Performance stocks both supercharger kits and turbo kits built for this platform. The Camden supercharger system uses a roots-type design developed specifically for automotive use and offers low-boost and high-boost configurations so you can match the power level to your build goals.

Turbo kits give the 22RE a different power delivery character, with big mid-range torque that suits trail use and technical off-roading. Nitrous oxide systems are also available for builders who want a quick and controlled power boost on demand.

Browse 2nd Gen Runner Suspension Parts

Bare Block, Odds and Ends, and Hard to Find Toyota 4Runner 2nd Gen Engine Parts

Bare blocks are available for builders who want to start fresh with a clean core, and our odds and ends category covers the miscellaneous hardware, sensors, and accessory components that round out any build. No second generation 4Runner project should stall over a single missing part:

  • Bare engine blocks for fresh builds and complete engine replacements
  • Miscellaneous engine hardware, sensors, and accessory engine components

LCE Performance has covered every Toyota generation since the 1960s, and the second gen 4Runner is no exception. All of our USA-made parts are stocked and ready to ship to keep your build moving forward.