Heavy Duty Shifter Seat

(RED)

It's common for the factory shift lever ball seat to wear, crumble and disintegrate over time. This often results in a sloppy or loose transmission shifter. The factory seat is soft so it can be squeezed into position. These shifter seats have machined grooves in the sides so instead of squeezing the seat into place, the groves on each side allow ours to rotate into its final position. This design makes a stronger, longer-lasting hardened urethane. These new heavy-duty seats will far outlast the stock units and will reduce shifter slop.

NOTE: Make sure you know what transmission you have before ordering.

These heavy-duty shifter seats come in two other sizes:

• Part #: 9035013 White Diameter is 1.655" Fits most other 1981 and newer common Toyota transmission applications with a direct top-mounted shift level, such as L-, G-, W-, and R-series transmissions including the new 6-speed RA60 transmission.
• Part #: 9035014 Blue Diameter is 1.530" Fits the transfer case shifter on all "Forward Shift" style transfer cases, such as a G52, G54, W56-C, W56-D, W56-E, R151F, and 1988-95 R150F applications with forward shifting transfer case shift bases. It also fits top shifting chain drive transfer case shift bases.

Contact our Tech Support Line for further information at 928-855-6341.