Home > DRIVETRAIN > SHORT SHIFTERS > Short Shifter Kits >

Heavy Duty WHITE Shifter Seat All Except 85-88 4wd W56-A & W56-B (Top Shift T-Case)
Heavy Duty WHITE Shifter Seat All Except 85-88 4wd W56-A & W56-B (Top Shift T-Case)


 
Our Price: $13.95

Part Number: 9035013
Qty:

Features
 
Features
Heavy Duty WHITE Shifter Seat All Except 85-88 4wd W56-A & W56-B (Top Shift T-Case)

It's common for the factory shift lever ball seat to wear, crumble and disintegrate over time. This often results in a sloppy or loose transmission shifter. The factory seat is soft so it can be squeezed into position. These shifter seats have machined groves in the sides so instead of squeezing the seat into place, the groves on each side allows ours to rotate into it's final position. This design makes a stronger, longer lasting hardened urethane. These new heavy duty seats will far out last the stock units and will reduce shifter slop.


This Shifter seat fits:
  • 1981-83 L-series (L45, L50, L52)
  • 1984-95 G-series (G52, G54, G58)
  • 1989-2004 W-series (W56-C, W56-D, W56-E, W59)
  • All 1986+ R-series (R150F, R151F)
  • All 2005+ RA-series (6-speed RA60F)
Additional notes:
In general, this fits all 1981 and newer manual transmission Toyota 2WD and 4WD trucks, including T100s, Tundras, Tacomas, FJ Cruisers, and 4Runners, but excludes the 1985-88 W56-A/B (uses red seat listed above). Also fits rear wheel drive Cressida's, Celica's & Supra's!

These heavy duty shifter seats come in three different sizes:

*Part #9035011 RED Diameter is 1.600" Fits 1985-1988 W56-A and W56-B Toyota transmissions (Commonly referred to as a Top Shift style transmission).

*Part #9035013 WHITE
Diameter is1.655" Fits most other 1981 and newer common Toyota transmission applications with a direct top-mounted shift level, such as L-, G-, W-, and R-series transmissions including the new 6-speed RA60 transmission.

*Part #9035014 Blue
Diameter is 1.530 Fits the transfer case shifter on all "Forward Shift" style transfer cases, such as a G52, G54, W56-C, W56-D, W56-E, R151F, and 1988-95 R150F applications with forward shifting transfer case shift bases. It also fits top shifting chain drive transfer case shift bases.






**Make sure you know what transmission you have before ordering**
If any questions please contact our Sales Dept. 877-505-2501

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters! Or try our new web site LCEPerformance
Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Average Customer Review: 5 of 5 Total Reviews: 17 Write a review.

  0 of 0 people found the following review helpful:
 
Shifter Seat September 11, 2018
Reviewer: Andy Cacciapaglia from San Diego, CA United States  
Perfect fit!! WAY better than OEM!! Rolls right in!! Makes it feel like a brand new truck!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Good replacement July 17, 2018
Reviewer: Johnny S. from Anchorage, AK United States  
Feels fully engaged when shifting into gears. 👍🏼

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Heavy Duty Shifter Seat March 26, 2018
Reviewer: jeremy nosko from gilbert, AZ United States  
5 Stars

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
01 w59 March 4, 2018
Reviewer: Dylan from Kingman, AZ  
Works good and fits my shifter from an 01 tacoma. Better than stock.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Shifter Seat October 30, 2017
Reviewer: Benjamin Jackson from Lakewood, CO United States  
It fit, made things nice and smooth.

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

DRIVETRAIN > SHORT SHIFTERS > Short Shifter Kits