Connecting Rod Bolt Set
(H-Beam Rod)
To eliminate the chance of rod failure when building your motor we highly recommend replacing your rod bolts. At continuous high rpm, the stock bolts will stretch, and rod bearing or rod failure occurs. These Pro...
Oil Dipstick Kit
(Short Style)
Brand new oil pan dipstick kit will include the measuring stick, tube for the block and bracket for the mounting tube. All OEM parts direct from Toyota! Don't look any further for a new replacement dipstick to replace...
Dual Row Timing Chain Only
These heavy-duty chains are the strongest on the market. They are OEM quality at a fraction of the price. Beware of imitations. This is a 98 link chain.
Contact our Tech Support Line for further information at...
Metal Backed Timing Chain Guides
(Single Row)
LC Engineering manufactures its metal-backed guides to address the common breakage problem of the plastic guides. These guides are a direct bolt-in upgrade and include mounting hardware.
Contact our...
Toggle Activation Switch
(Covered)
This covered toggle switch enables performance enthusiasts to activate solenoids, fuel pumps, etc. This switch keeps you from accidentally blasting Nitrous into the engine before you are ready.
Contact our Tech...
Single Row Timing Chain
These heavy-duty chains are the strongest on the market. They are OEM quality at a fraction of the price. Beware of imitations. This is a 96 link chain.
Contact our Tech Support Line for further information at...
Pro Connecting Rod Bolt
To eliminate the chance of rod failure when building your motor, we highly suggest replacing the stock rod bolts. A continuous high rpm, the stock bolts will stretch, and rod bearing or rod failure occurs. These Pro Rod Bolts...
OE Head Bolts
If you ever remove your cylinder head, you should always replace the head bolts to prolong the service life of your engine. Cylinder head bolts go through a lot of stress, even in stock engines, and retorquing used bolts can sometimes...
Oil Pump Drive Spline
(Dual Row)
If you're replacing the single timing chain on your early Toyota motor (83-84) with the more desirable dual-row chain, you will need a dual row drive spline to make it all work right.
OEM Toyota Part #:...
Adjustable Timing Tag
(Underdrive)
Set your ignition timing exactly with the adjustable timing tag. Designed to work with our 4" crank pulleys. Set the tag one time at TDC and then time your motor with 100% accuracy. No guesswork!
NOTE: To achieve...
Billet Valve Cover Hardware Kit 22R/RE
(Includes Billet Valve Cover Seals, Studs & Acorn Nut)
Looking to turn heads at your next show? Then look no further than our new hand polished fasteners that are guaranteed to catch peoples attention when looking...
Safety Auto Main Bearing Set
Offset/Center locating tabs
When overhauling/rebuilding an engine, it is highly recommended that you replace all bearings in the bottom end.These bearing sets will get your engine back to the proper specification and ready...