PLX SM Wideband Air Fuel Ratio Sensor Module
(No Gauge)
We're proud to introduce the next generation wideband oxygen sensor controller with intelligent health monitoring technology and current for improved sensor performance. The new Gen4 Wideband AFR...
Hall Sensor
(Replacement)
The Hall Sensor mounts on the front cover and uses magnets strategically mounted in the balancer pulley to generate a signal for proper ignition timing.
Contact our Tech Support Line for further information at...
Pro Spark Plug Wires/ RED ONLY
Magnecor's KV85 competition 8.5mm ignition cables features Magnecor's exclusive 2.5mm high-capacity metallic inductance EMI-suppressed conductor consisting of stainless steel wire precisely wound at 200 turns per inch...
LCE Alternator Bracket Kit
(GM 1 Wire)
We are happy to introduce a new GM Style Alternator Bracket Kit. This bracket kit will allow you to bolt a GM style 1 wire alternator to your 20R, 22R or 22RE motor with no major modifications, and it works with...
Knock Sensor Upgrade
This is for the upgrade for the newest Pro Fuel Kits using the SDS computer. The upgrade will come with the Knock Sensor and adapter. Knock control allows the ECU to retard the ignition timing automatically if knocking is detected...
Street Distributor
If your engine performance suffers you may need a replacement Distributor. LC Engineering has introduced a new line of distributors that come complete with new cap rotor and electronics. Save money over the OEM price with these...
PLX Bosch LSU 4.9 Wideband Oxygen Sensor
The Bosch LSU 4.9 wideband oxygen sensor is a 5 wire sensor with a built-in calibration resistor with an M18 x 1.5 thread. This is the industry standard sensor for tuning internal combustion engines of various...
D.U.I. Coil Kit
(Race)
The D.U.I. Racing Coil Kit is capable of 9000 rpm. That's almost twice the output of a stock HEI coil! The coil comes installed in a brass terminal cap and includes the rotor and nylon rotor hold down screws. Spark plug gaps...
11mm Livewires
11mm LiveWires come with space age, heat resistant sleeving to provide protection from exhaust heat. The sleeving is heat-treated glass braid and is non-flammable and non-corrosive to chemicals. LiveWires are direct fit - no assembly is...
PLX SM Exhaust Gas Temperature Sensor
The EGT sensor kit is the ideal sensor to be used with the PLX SM-EGT sensor module. It is a standard K Type thermo coupler designed specifically for exhaust gas temperature measurements for high performance...