-
Polyurethane Steering Rack Bushings Tighten sloppy steering on your rack and pinion steering system with this urethane bushing upgrade kit! Simple daily driving wears the factory rubber bushings where the rack system mounts. This causes delayed...$36.37 -
T3 Inlet Turbo Flange (4-Bolt) This flange is constructed of 1/2" steel and has threaded holes for easy installation of your turbo. It is designed for any turbo that uses a T3 style inlet flange. Don't see what you need? Just call our Technical Dept...$36.15 -
Evans Waterless Coolant Prep Fluid (1/2 Gallon) Evans Prep Fluid is a waterless cooling system flush designed to remove water-based antifreeze after draining the cooling system of an engine. Prep Fluid should be used when block drains are unavailable...$36.00 -
Limiting Strap Clevis Kit Looking for an easy way to mount your limit straps? Trail Gear is now offering a Clevis Kit for your limiting straps in both single and multiple strap configurations. Our Clevis kits are made out of Super Metal Chromoly Steel...$35.69 -
Evans Cooling Analog Refractometer A refractometer is a laboratory or field device for the measurement of an index of refraction (refractometry). Evans Cooling refractometers are used to measure the final water content of a conversion and uses a Brix...$35.30 -
PLX 4.9 Upgrade Wideband Cable The O2 sensor harness connects the PLX Wideband Controller with a Bosch LSU 4.9 sensor. It includes a 6 position molex mini fit jr male plug on one end and a standard 6 position Bosch LSU 4.9 connector on the other end...$33.98 -
Residual Valve (2 PSI) When converting your rear drum brakes to disc you will need to hold pressure on the rear line to keep the pads in contact with the rotors. If you don't then you will have to pump your pedal to get a firm brake feel. This residual...$32.39 -
Water Temp Sender Manifold (Inline Radiator Hose) If you want to add a real water temperature gauge to your Toyota, instead of the factory "idiot light", we have the solution. LC Engineering's in-line temperature sending unit manifold is made out of...$32.08 -
Stainless Steel U-Bend (2 1/2") LC Engineering sells 409 stainless tubing .065" wall for your project. 409 stainless is a great low-cost choice for exhaust systems. This is the same grade of stainless steel that we use in our Pro Flow exhaust systems...$32.08 -
Torx Multi Tool LC Engineering brings to you the New 9-Piece Torx - Multi Tool Kit. This all in one set offers all you would need with a tool kit. Don't be stuck again driving around with bulky tool sets. This is just the perfect size to store in the...$30.89 -
Garret T3 Exhaust Discharge Flange (5 Bolt) All of LC Engineering's flanges are laser cut then finished machined on the CNC to ensure exact tolerances and fit. This 5-bolt flange fits standard 5-bolt T3/T4 turbo exhaust housings, including the turbos...$30.85 -
S&B Precision II Cleaning & Oil Kit (88-0008) The complete system for accurately cleaning and re-oiling your air filter. Works on any S&B filter and 95% of all other high performance filters. Specifications: Maximize performance and...$30.85
-
fast shipping
Speed Delivery