Overland

Panhard Link Frame Bracket (Front 3-Link) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or 4-Link system...

Shock Mounts These shock mounts are designed to weld directly on to the Rock Assault™ Front Axle Housing. NOTE: Sold as a pair. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for...

Ultimate Chevy Leaf Spring Hanger Kit (Low Range Off-Road) Our Chevy Leaf Spring Hanger is just like the very popular sloped style hangers but with an inside diameter of 3" and a 9/16" bolt hole. Use these for mounting up the fixed end of the Chevy...

Limiting Strap Clevis Kit Looking for an easy way to mount your limit straps? Trail Gear is now offering a Clevis Kit for your limiting straps in both single and multiple strap configurations. Our Clevis kits are made out of Super Metal Chromoly Steel...

Trail-Link 3 Front Shock Strap (Compressed / Extended) Individual Trail-Link Three™ Front 3-Link strap. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may...

Leaf Spring Frame Tube Jigs Frame Tubes install into IFS style frame for mounting leaf springs. Accepts stock Toyota front bushings. Jigs are used for positioning tubes in frame. This product should not be used in a manner that violates Federal EPA...

Leafspring Bumpstop Extensions When installing leaf springs it's important to have bumpstops to limit how far the leaf springs compress. These easy to weld on extensions make installing bumpstops quick and easy. Extensions weld directly to the frame...

Upper Link Axle Bracket (3-Link / Front) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or 4-Link system...

Weld-On Attachment Point (Flat) Weld-On Attachment Points are machined from Billet 1020 cold rolled steel. They come in two different fitments, one is coped on the bottom so that it can be welded on to a 3" axle tube, and this one has a flat bottom...

Weld-On Attachment Point (Coped) Weld-On Attachment Points are machined from Billet 1020 cold rolled steel. They come in two different fitments, one is flat on the bottom so that it can be welded on to a plate, tubing, or any other flat surface, and...

Greasable Shackle Bolt (You Choose Size) LC Engineering carries all the parts you need to change or rebuild your own shackles. Bolts feature threaded zerk fittings that won't fall out when you're greasing them. Contact our Tech Support Line for...

Shackle Bolt (Greasable) LC Engineering carries all the parts you need to change or rebuild your own shackles. Bolts feature threaded zerk fittings that won't fall out when you're greasing them. NOTE: Bolt is M18 x 150mm. For use with Trail Gear...